Using a Bolt Rig in Fishing

Where educated or nervous fish are giving tentative bites on normal legering tactics, often referred to as "twitch" bites, you have to find a way of accentuating the bites you are getting by encouraging the fish to move off with the bait in a more positive manner. The short hooklink paternoster encourages positive bites when used with a heavy lead and in fact this could be considered to be a type of bolt rig, as indeed can the carp angler's helicopter rig. The name originated because the purpose of the rigs is to make the fish bolt with the baits in their mouths, thereby giving unmistakable indications.

Pure bolt rigs, however, take that general principle one stage further in that they will normally feature the bait mounted on a hair rig with the hook itself being bare, so that the hook point pricking the fish further encourages it to bolt.

The standard bolt rig is very similar to the earliest leger arrangement of a running or semifixed lead on the main line above the hooklink, although the bolt features a much heavier lead than is actually needed for the cast, coupled with a very short hooklink of about 6 in (15 cm). It is fair to say that such rigs are mainly used by carp anglers, although they are becoming more in, vogue with barbel anglers fishing statically for bigger-than-average fish.

One adaptation, which is now the most often used rig by carp anglers, is to swap the normal bomb leger weight tor an in-line, drilled streamlined lead, which is very resistant to snagging. These leads are used with stiff tubing through the centre, through which the main line passes, this tubing being connected by silicon tubing to the hooklink swivel to make the lead semi-fixed.

Most anglers using bolt rigs will do so in combination with braided or dacron hooklinks, and if long casting is involved, a substantial problem exists as the limp hooklink materials will tangle around the main line. To overcome this, these rigs usually incorporate a length of rig tubing longer than the hooklink above the lead. During flight, the heavy lead obviously flies in advance, with the hooklink trailing behind. It is at this stage that the anti-tangle tube prevents the link curling around the main line. If you want to avoid tubing but still use braids, another solution is to use a setting gel that quickly dissolves in water. Some gels stiffen the link for casting, but revert to normal after a few minutes' immersion in the water.

Visit fishfinders.com to find out more about fishing techniques and technology.

This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

The Colder Season Could Be the Perfect Time to Create Usable Things Using Tires and Eye Bolt Secures

If you have some old tires lying around then you have a perfect form for pouring concrete or filling with sand and dirt. Sounds exciting, huh? Well, wait until you read about what you can create using this rubber foundation when you add the utility of an eye bolt or two and some various forms of rope!

Remember the simplicity of the game of tetherball - no console or Wii required? Well you can replicate this traditional family game by using a tire. Simply place the tire on a clean dirt surface and line the bottom with some newspaper. Next fill the interior of the tire with a mix of concrete and while the concrete is still wet, add an upright pole. Once the base is completely dry, you will need to drill the appropriate eye bolt into the pole and attach the rope and ball. Stand back and have a ball.

This same type of system can also be employed in the garden. Rather then adding a tall pole as for our tether ball, add a smaller series of 1" x 1" x 5' poles between several dirt-filled tires. Insert a small eye bolt at various spots on each support and then string twine between each set of bolts to create a support for your trailing beans or tomatoes to climb. Because the tires can be moved, if inclimate weather is approaching you are able to lay down the vines until the storm passes.

A final use for this basic set up would be to prepare two bases such as with a tetherball pole. Add a heavy duty eye bolt at each pole and connect with a hose or wire rope that can be used to hang your laundry. There is nothing sweeter on a Spring day then fresh sheets that have been dried in the sun and cool breeze. Just pour a glass of lemonade and you will feel as if you are living in another, simpler time...enjoy!

An experienced owner-operator, Scott Brunson helps members of the transportation industry each day as a product specialist for US Cargo Control, an online retailer of logistic straps and other cargo securement products. Find what you're looking for at US Cargo Control today.

This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

Using a Feeder Bolt Rig in Fishing

There are three variations of the feeder bolt rig for use in stillwaters, the most commonly used being, in essence, identical to the short hooklink paternoster, with a heavy swimfeeder replacing the lead. This is the rig that has become a standard for Stillwater roach anglers, and has solved the problem of missed bites. It normally features a light hooklink about 18 in (45 cm) above a 2 oz (50 g) blockend feeder, baited with maggots or casters. After casting, the line is drawn tight, a heavy butt indicator attached, and most bites are indicated by a dramatic drop back.

The second version has an in-line swimfeeder on the main line 18 in (45 cm) above the hooklink, with a 2 oz (50 g) bomb on the end of the line, as in a normal paternoster. When the cast has been made, the action of drawing the tackle tight invariably pulls the terminal rig a little way towards the bank. In the first arrangement, this will pull the hookbait away from the maggots escaping from the swimfeeder whereas in this case, it pulls the hook towards the free offerings. This is a small point that could make all the difference on a hard day.

When roach fishing in either of these styles, which could see only 2 lb (0.91 kg) hooklinks and size 16 hooks, it is fatal to strike as such, as it is easy to crack off on a tight line. It is sufficient to simply lift the rod and start playing the fish. It is also one of those occasions to backwind rather than use a clutch.

Casting heavy feeders requires a main line of at least 6 lb (2.72 kg) breaking strain, and it is impossible to set a clutch to suit a 2 lb (0.91 kg) hooklink in these circumstances. To protect the light hooklinks during the playing of a big roach, or anything else that takes the bait for that matter, many anglers insert a short length of power gum or pole elastic above the hooklink as a shock absorber.

The third bolt-feeder arrangement is very much in vogue these days, especially on commercial small carp fisheries, and it is called the method feeder rig. A ball of groundbait and mixed feed particles is moulded round a special method feeder and the hookbait, invariably mounted on a very short hooklink, is pushed into the side of the feed. The idea is that the fish start rooting around in the bait, breaking it down, and the hookbait is taken quite naturally as it falls free of the whole. It is a devastating presentation and has led to many large catches.

Visit fishfinders.com to find out more about fishing techniques and technology.

This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.

Benefits of Using Panic Bolts

The Victoria Hall was a large concert hall in Sunderland, England. At the end of a show there on June 16, 1883, the entertainers began to distribute prizes to children with certain ticket numbers. The children with those numbers hurried to the staircase leading downstairs. The door at the bottom of the staircase opened inward and allowed only a small space for the children to pass. Stampede killed over 180 out of 1,100 children. This disaster, called the 1883 Victoria Hall Disaster, could have been stopped by a door device. If only doors had panic bolts then.

Thanks to Robert Alexander Briggs. He invented the panic bolt. The 1883 Victoria Hall Disaster shall never happen again. Today, fire safety signs are essential in allowing employees to escape in case the workplace is burned. These signs help them to follow directions toward the fire exit. But that does not stop there. It is possible to be trapped in the fire exit if the fire escape door cannot be opened. Breaking the glass key case is not a very good idea either as one may cut himself while being panic-stricken. This is the very reason why fire escape doors must be equipped with panic bolts that does not require breaking glasses and causes the door to swing open easily.

Panic bolts, with exit stoppers, are made to secure doors and protect the properties of the business from theft. Moreover, they ensure safe exit provision. These bolts are installed on doors, especially emergency exit doors, and they can be released by pressure. Buildings that usually accommodate large crowds, such as stadiums, theatres, malls, and the Victoria Hall, use these bolts. Now, even smaller business establishments and other public buildings are required to be equipped with this device.

Aside from preventing unwanted entries, panic bolts allow employees to escape safely and swiftly in cases of fires or other emergencies in the business premises. Most of these bolts have ten years warranty. For single doors, a good single panic bolt is two point locking. Its upper rod goes into the top of the door frame and the lower rod goes into the floor. There is also a panic bolt, which is suitable for single doors, non-rebated double doors, and the inactive leaf of rebated double doors. The good bolts have the standard silver anodised finish making it highly resistant to corrosion and vertical bolts that can be cut on-site. For additional security, the bolt must have two point independent locking.

The properties and the employees are the indispensable assets of the business, and thus, they should be given the utmost protection. To do this job for your business, panic bolts must be installed on the emergency exit doors of the workplace. First, this device secures the fire escape door preventing unwanted entries and keeping your properties from being stolen. Second, this device makes it safe and swift for the employees to open the fire exit door in case of emergencies. Equip the workplace with fire extinguishers, fire blankets, fire alarm, and a fire escape door panic bolt.

For more information about panic bolts please visit: http://www.fireprotectiononline.co.uk/fire-exit-security/

This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.